Bosch DeviceBridge app: Bridging IT with OT In this video, you will learn how to bridge OT with IT using ctrl CORE and Bosch DeviceBridge app.
Timestamps
- 0:00 - Introduction
- 0:20 - Why to bridge IT and OT?
- 1:05 - Bosch Device Bridge app
- 3:18 - Example 1: Collect data from Delta PLC via MODBUS TCP/IP
- 8:15 - Add business model to create an alert
- 13:30 - Collect data from S7-1500 PLC via S7 Connection
- 18:20 - Add business model in CSharp to write back data to Siemens PLC
- 22:45 - Move data from Delta PLC to Siemens PLC using CSharp
- 23:00 - Adding a conveter to scale the values
- 30:00 - Collect 2 PLCs data and moce to the ctrlX CORE Data Layer
- 33:27 - Read the data from the ctrlX Data Layer on the Node-RED
- 35:35 - Adding a routing
- 36:25 - Adding a Service Container and Publishing the project
- 38:25 - Example 2: Collect the data from S7-1500 via OPC UA
- 42:40 - Collect the data from Raspberry PI via MQTT
- 46:50 - Adding data model 44:45 - Send the data to Qubitro Cloud via MQTT
- 51:07 - Send the data to Mondo Database (Cloud) via TCP/IP
- 59:59 - Outroduction
